| IO Supply (Max) (V) |
3.63 |
| IO Supply (Min) (V) |
1.62 |
| Digital Supply (Max) (V) |
3.63 |
| Digital Supply (Min) (V) |
1.62 |
| Signal to noise ratio |
102 dB signal to noise ratio |
| Dynamic range |
102 dB dynamic range |
| THD+N Ratio |
96 dB THD+N Ratio |
| DSP |
NO |
| Protection |
/ |
| Control Interface |
IIC |
| Temperature |
-40℃~85℃ |
? Multichannel high-performance ADC:4 channel analog microphones or line-in;4 channel digital PDM microphones
? ADC line and microphone differential input Performance:102 dB signal to noise ratio ;102 dB dynamic range; 96 dB THD+N Ratio
? ADC input voltage:Differential, 2-VRMS full-scale inputs;Single-ended, 1-VRMS full-scale inputs
? Programmable channel settings:Channel gain: -6 dB to 36 dB,1 dB steps;Digital volume control: -96dB to 30dB, 0.094dB/step;Phase calibration with 163 ns resolution
? Programmable microphone bias
? Programmable high pass filter(HPF)
? Automatic gain controller (AGC)
? I2C-bus control interface
? Integrated high-performance audio PLL
? I2S/TDM interface (Advanced ):I2S, Left-Justified and Right-Justified;Supports 1/2/4/6/8/16 slots TDM;Supports 8 to 96kHz sample rates;Data Width: 8~32 Bits;Master or slave interface
? Power Supplies :VDDA、VDDM: 3.3V;VDDP: 3.3 V or 1.8 V
The AW89402 is a high performance, low power 4-channel audio analog-to-digital converter (ADC) for microphone array application.
The device supports line and microphone inputs. The device integrates four PGAs for quad differential inputs, MIC1P & MIC1N, MIC2P & MIC 2N, MIC3P & MIC3N and MIC4P & MIC4N. The device supports simultaneous sampling of up to four analog channels or four digital channels for the pulse density modulation (PDM) microphone input.
The device integrates programable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), and allows for sample rates up to 96 kHz.
The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with the I2C interface
The device is very suitable for music and voice application, such as Microphone Array, Far field voice capture, Smart speaker, Conference system, Sound bar, Audio Interface, etc.
AW89402 is available in a WBQFN 4X4-32L (0.75) Package.
中文
